nRF51 SDK - S110 SoftDevice
 All Data Structures Functions Variables Typedefs Enumerations Enumerator Groups Pages

Data Structures

struct  nrf_radio_request_earliest_t
 Parameters for a request for a timeslot as early as possible. More...
 
struct  nrf_radio_request_normal_t
 Parameters for a normal radio request. More...
 
struct  nrf_radio_request_t
 Radio request parameters. More...
 
struct  nrf_radio_signal_callback_return_param_t
 Return parameters of the radio timeslot signal callback. More...
 
struct  nrf_ecb_hal_data_t
 AES ECB data structure. More...
 

Typedefs

typedef volatile uint8_t nrf_mutex_t
 Represents a mutex for use with the nrf_mutex functions. More...
 
typedef uint8_t nrf_app_irq_priority_t
 The interrupt priorities available to the application while the softdevice is active.
 
typedef uint8_t nrf_power_mode_t
 Represents a power mode, used in power mode functions.
 
typedef uint8_t nrf_power_failure_threshold_t
 Represents a power failure threshold value.
 
typedef uint32_t nrf_power_dcdc_mode_t
 Represents a DCDC mode value.
 
typedef uint8_t nrf_radio_notification_distance_t
 Radio notification distances.
 
typedef uint8_t nrf_radio_notification_type_t
 Radio notification types.
 
typedef
nrf_radio_signal_callback_return_param_t *(* 
nrf_radio_signal_callback_t )(uint8_t signal_type)
 The radio signal callback type. More...
 

Enumerations

enum  NRF_SOC_SVCS {
  SD_FLASH_PAGE_ERASE = (0x20),
  SD_FLASH_WRITE,
  SD_FLASH_PROTECT,
  SD_MUTEX_NEW = (0x23),
  SD_MUTEX_ACQUIRE,
  SD_MUTEX_RELEASE,
  SD_NVIC_ENABLEIRQ,
  SD_NVIC_DISABLEIRQ,
  SD_NVIC_GETPENDINGIRQ,
  SD_NVIC_SETPENDINGIRQ,
  SD_NVIC_CLEARPENDINGIRQ,
  SD_NVIC_SETPRIORITY,
  SD_NVIC_GETPRIORITY,
  SD_NVIC_SYSTEMRESET,
  SD_NVIC_CRITICAL_REGION_ENTER,
  SD_NVIC_CRITICAL_REGION_EXIT,
  SD_RAND_APPLICATION_POOL_CAPACITY,
  SD_RAND_APPLICATION_BYTES_AVAILABLE,
  SD_RAND_APPLICATION_GET_VECTOR,
  SD_POWER_MODE_SET,
  SD_POWER_SYSTEM_OFF,
  SD_POWER_RESET_REASON_GET,
  SD_POWER_RESET_REASON_CLR,
  SD_POWER_POF_ENABLE,
  SD_POWER_POF_THRESHOLD_SET,
  SD_POWER_RAMON_SET,
  SD_POWER_RAMON_CLR,
  SD_POWER_RAMON_GET,
  SD_POWER_GPREGRET_SET,
  SD_POWER_GPREGRET_CLR,
  SD_POWER_GPREGRET_GET,
  SD_POWER_DCDC_MODE_SET,
  SD_APP_EVT_WAIT,
  SD_CLOCK_HFCLK_REQUEST,
  SD_CLOCK_HFCLK_RELEASE,
  SD_CLOCK_HFCLK_IS_RUNNING,
  SD_PPI_CHANNEL_ENABLE_GET,
  SD_PPI_CHANNEL_ENABLE_SET,
  SD_PPI_CHANNEL_ENABLE_CLR,
  SD_PPI_CHANNEL_ASSIGN,
  SD_PPI_GROUP_TASK_ENABLE,
  SD_PPI_GROUP_TASK_DISABLE,
  SD_PPI_GROUP_ASSIGN,
  SD_PPI_GROUP_GET,
  SD_RADIO_NOTIFICATION_CFG_SET,
  SD_ECB_BLOCK_ENCRYPT,
  SD_RADIO_SESSION_OPEN,
  SD_RADIO_SESSION_CLOSE,
  SD_RADIO_REQUEST,
  SD_EVT_GET,
  SD_TEMP_GET,
  SVC_SOC_LAST
}
 The SVC numbers used by the SVC functions in the SoC library.
 
enum  NRF_MUTEX_VALUES {
  NRF_MUTEX_FREE,
  NRF_MUTEX_TAKEN
}
 Possible values of a nrf_mutex_t.
 
enum  NRF_APP_PRIORITIES {
  NRF_APP_PRIORITY_HIGH = 1,
  NRF_APP_PRIORITY_LOW = 3
}
 Possible values of nrf_app_irq_priority_t.
 
enum  NRF_POWER_MODES {
  NRF_POWER_MODE_CONSTLAT,
  NRF_POWER_MODE_LOWPWR
}
 Possible values of nrf_power_mode_t. More...
 
enum  NRF_POWER_THRESHOLDS {
  NRF_POWER_THRESHOLD_V21,
  NRF_POWER_THRESHOLD_V23,
  NRF_POWER_THRESHOLD_V25,
  NRF_POWER_THRESHOLD_V27
}
 Possible values of nrf_power_failure_threshold_t. More...
 
enum  NRF_POWER_DCDC_MODES {
  NRF_POWER_DCDC_MODE_OFF,
  NRF_POWER_DCDC_MODE_ON,
  NRF_POWER_DCDC_MODE_AUTOMATIC
}
 Possible values of nrf_power_dcdc_mode_t. More...
 
enum  NRF_RADIO_NOTIFICATION_DISTANCES {
  NRF_RADIO_NOTIFICATION_DISTANCE_NONE = 0,
  NRF_RADIO_NOTIFICATION_DISTANCE_800US,
  NRF_RADIO_NOTIFICATION_DISTANCE_1740US,
  NRF_RADIO_NOTIFICATION_DISTANCE_2680US,
  NRF_RADIO_NOTIFICATION_DISTANCE_3620US,
  NRF_RADIO_NOTIFICATION_DISTANCE_4560US,
  NRF_RADIO_NOTIFICATION_DISTANCE_5500US
}
 Possible values of nrf_radio_notification_distance_t. More...
 
enum  NRF_RADIO_NOTIFICATION_TYPES {
  NRF_RADIO_NOTIFICATION_TYPE_NONE = 0,
  NRF_RADIO_NOTIFICATION_TYPE_INT_ON_ACTIVE,
  NRF_RADIO_NOTIFICATION_TYPE_INT_ON_INACTIVE,
  NRF_RADIO_NOTIFICATION_TYPE_INT_ON_BOTH
}
 Possible values of nrf_radio_notification_type_t. More...
 
enum  NRF_SOC_EVTS {
  NRF_EVT_HFCLKSTARTED,
  NRF_EVT_POWER_FAILURE_WARNING,
  NRF_EVT_FLASH_OPERATION_SUCCESS,
  NRF_EVT_FLASH_OPERATION_ERROR,
  NRF_EVT_RADIO_BLOCKED,
  NRF_EVT_RADIO_CANCELED,
  NRF_EVT_RADIO_SIGNAL_CALLBACK_INVALID_RETURN,
  NRF_EVT_RADIO_SESSION_IDLE,
  NRF_EVT_RADIO_SESSION_CLOSED,
  NRF_EVT_NUMBER_OF_EVTS
}
 SoC Events. More...
 
enum  NRF_RADIO_CALLBACK_SIGNAL_TYPE {
  NRF_RADIO_CALLBACK_SIGNAL_TYPE_START,
  NRF_RADIO_CALLBACK_SIGNAL_TYPE_TIMER0,
  NRF_RADIO_CALLBACK_SIGNAL_TYPE_RADIO,
  NRF_RADIO_CALLBACK_SIGNAL_TYPE_EXTEND_FAILED,
  NRF_RADIO_CALLBACK_SIGNAL_TYPE_EXTEND_SUCCEEDED
}
 The Radio signal callback types. More...
 
enum  NRF_RADIO_SIGNAL_CALLBACK_ACTION {
  NRF_RADIO_SIGNAL_CALLBACK_ACTION_NONE,
  NRF_RADIO_SIGNAL_CALLBACK_ACTION_EXTEND,
  NRF_RADIO_SIGNAL_CALLBACK_ACTION_END,
  NRF_RADIO_SIGNAL_CALLBACK_ACTION_REQUEST_AND_END
}
 The actions requested by the signal callback. More...
 
enum  NRF_RADIO_HFCLK_CFG {
  NRF_RADIO_HFCLK_CFG_DEFAULT,
  NRF_RADIO_HFCLK_CFG_FORCE_XTAL
}
 Radio timeslot high frequency clock source configuration. More...
 
enum  NRF_RADIO_PRIORITY {
  NRF_RADIO_PRIORITY_HIGH,
  NRF_RADIO_PRIORITY_NORMAL
}
 Radio timeslot priorities. More...
 
enum  NRF_RADIO_REQUEST_TYPE {
  NRF_RADIO_REQ_TYPE_EARLIEST,
  NRF_RADIO_REQ_TYPE_NORMAL
}
 Radio timeslot request type. More...
 

Detailed Description

Typedef Documentation

typedef volatile uint8_t nrf_mutex_t

Represents a mutex for use with the nrf_mutex functions.

Note
Accessing the value directly is not safe, use the mutex functions!
typedef nrf_radio_signal_callback_return_param_t*(* nrf_radio_signal_callback_t)(uint8_t signal_type)

The radio signal callback type.

Note
In case of invalid return parameters, the radio timeslot will automatically end immediately after returning from the signal callback and the NRF_EVT_RADIO_SIGNAL_CALLBACK_INVALID_RETURN event will be sent.
The returned struct pointer must remain valid after the signal callback function returns. For instance, this means that it must not point to a stack variable.
Parameters
[in]signal_typeType of signal, see NRF_RADIO_CALLBACK_SIGNAL_TYPE.
Returns
Pointer to structure containing action requested by the application.

Enumeration Type Documentation

Possible values of nrf_power_dcdc_mode_t.

Enumerator
NRF_POWER_DCDC_MODE_OFF 

The DCDC is always off.

NRF_POWER_DCDC_MODE_ON 

The DCDC is always on.

NRF_POWER_DCDC_MODE_AUTOMATIC 

The DCDC is automatically managed.

Possible values of nrf_power_mode_t.

Enumerator
NRF_POWER_MODE_CONSTLAT 

Constant latency mode. See power management in the reference manual.

NRF_POWER_MODE_LOWPWR 

Low power mode. See power management in the reference manual.

Possible values of nrf_power_failure_threshold_t.

Enumerator
NRF_POWER_THRESHOLD_V21 

2.1 Volts power failure threshold.

NRF_POWER_THRESHOLD_V23 

2.3 Volts power failure threshold.

NRF_POWER_THRESHOLD_V25 

2.5 Volts power failure threshold.

NRF_POWER_THRESHOLD_V27 

2.7 Volts power failure threshold.

The Radio signal callback types.

Enumerator
NRF_RADIO_CALLBACK_SIGNAL_TYPE_START 

This signal indicates the start of the radio timeslot.

NRF_RADIO_CALLBACK_SIGNAL_TYPE_TIMER0 

This signal indicates the NRF_TIMER0 interrupt.

NRF_RADIO_CALLBACK_SIGNAL_TYPE_RADIO 

This signal indicates the NRF_RADIO interrupt.

NRF_RADIO_CALLBACK_SIGNAL_TYPE_EXTEND_FAILED 

This signal indicates extend action failed.

NRF_RADIO_CALLBACK_SIGNAL_TYPE_EXTEND_SUCCEEDED 

This signal indicates extend action succeeded.

Radio timeslot high frequency clock source configuration.

Enumerator
NRF_RADIO_HFCLK_CFG_DEFAULT 

Use the currently selected oscillator as HF clock source during the timeslot (i.e. the source is not specified).

NRF_RADIO_HFCLK_CFG_FORCE_XTAL 

Force external crystal to be used as HF clock source during whole the timeslot.

Possible values of nrf_radio_notification_distance_t.

Enumerator
NRF_RADIO_NOTIFICATION_DISTANCE_NONE 

The event does not have a notification.

NRF_RADIO_NOTIFICATION_DISTANCE_800US 

The distance from the active notification to start of radio activity.

NRF_RADIO_NOTIFICATION_DISTANCE_1740US 

The distance from the active notification to start of radio activity.

NRF_RADIO_NOTIFICATION_DISTANCE_2680US 

The distance from the active notification to start of radio activity.

NRF_RADIO_NOTIFICATION_DISTANCE_3620US 

The distance from the active notification to start of radio activity.

NRF_RADIO_NOTIFICATION_DISTANCE_4560US 

The distance from the active notification to start of radio activity.

NRF_RADIO_NOTIFICATION_DISTANCE_5500US 

The distance from the active notification to start of radio activity.

Possible values of nrf_radio_notification_type_t.

Enumerator
NRF_RADIO_NOTIFICATION_TYPE_NONE 

The event does not have a radio notification signal.

NRF_RADIO_NOTIFICATION_TYPE_INT_ON_ACTIVE 

Using interrupt for notification when the radio will be enabled.

NRF_RADIO_NOTIFICATION_TYPE_INT_ON_INACTIVE 

Using interrupt for notification when the radio has been disabled.

NRF_RADIO_NOTIFICATION_TYPE_INT_ON_BOTH 

Using interrupt for notification both when the radio will be enabled and disabled.

Radio timeslot priorities.

Enumerator
NRF_RADIO_PRIORITY_HIGH 

High (equal priority as the normal connection priority of the SoftDevice stack(s)).

NRF_RADIO_PRIORITY_NORMAL 

Normal (equal priority as the priority of secondary activites of the SoftDevice stack(s)).

Radio timeslot request type.

Enumerator
NRF_RADIO_REQ_TYPE_EARLIEST 

Request timeslot as early as possible. This should always be used for the first request in a session.

NRF_RADIO_REQ_TYPE_NORMAL 

Normal timeslot request.

The actions requested by the signal callback.

This code gives the SOC instructions about what action to take when the signal callback has returned.

Enumerator
NRF_RADIO_SIGNAL_CALLBACK_ACTION_NONE 

Return without action.

NRF_RADIO_SIGNAL_CALLBACK_ACTION_EXTEND 

Request an extension of the current timeslot (maximum execution time for this action is when the extension succeeded).

NRF_RADIO_SIGNAL_CALLBACK_ACTION_END 

End the current radio timeslot.

NRF_RADIO_SIGNAL_CALLBACK_ACTION_REQUEST_AND_END 

Request a new radio timeslot and end the current timeslot.

SoC Events.

Enumerator
NRF_EVT_HFCLKSTARTED 

Event indicating that the HFCLK has started.

NRF_EVT_POWER_FAILURE_WARNING 

Event indicating that a power failure warning has occurred.

NRF_EVT_FLASH_OPERATION_SUCCESS 

Event indicating that the ongoing flash operation has completed successfully.

NRF_EVT_FLASH_OPERATION_ERROR 

Event indicating that the ongoing flash operation has timed out with an error.

NRF_EVT_RADIO_BLOCKED 

Event indicating that a radio timeslot was blocked.

NRF_EVT_RADIO_CANCELED 

Event indicating that a radio timeslot was canceled by SoftDevice.

NRF_EVT_RADIO_SIGNAL_CALLBACK_INVALID_RETURN 

Event indicating that a radio signal callback handler return was invalid.

NRF_EVT_RADIO_SESSION_IDLE 

Event indicating that a radio session is idle.

NRF_EVT_RADIO_SESSION_CLOSED 

Event indicating that a radio session is closed.